جديد مدماج Verti-till turbo cultivator Green Wave 10.4 m























إذا قررت شراء المعدات بسعر منخفض، فتأكد أنك تتواصل مع البائع الحقيقي. اكتشف أكبر قدر ممكن من المعلومات عن مالك المعدات. تتمثل إحدى طرق الغش في تقديم نفسك كشركة حقيقية. إن ساورك شك، أخبرنا عن ذلك من أجل تشديد الرقابة وذلك من خلال نموذج التعليقات.
قبل أن تقرر القيام بالشراء، احرص على مراجعة العديد من عروض البيع بعناية لفهم متوسط تكلفة المعدات التي اخترتها. إذا كان سعر العرض الذي أعجبك أقل بكثير من عروض مشابهة، ففكر في الأمر بتأنٍ. قد يكون هناك فرق أسعار هائل يشير إلى عيوب مخفية أو أن البائع يحاول ارتكاب أعمال احتيالية.
ابتعد عن شراء المنتجات التي يكون سعرها مختلف بشدة عن متوسط السعر لمعدات مشابهة.
لا توافق على الوعود المثيرة للشكوك والبضائع المدفوعة مسبقًا. إن ساورك شك، فلا تخاف من طلب توضيح التفاصيل وأن تطلب صورًا ومستندات إضافية للمعدات وأن تفحص صحة التصديق على تلك المستندات وتطرح الأسئلة التي تساورك.
أكثر أنواع الاحتيال شيوعًا، قد يطلب البائعون غير المنصفون مبلغًا معينًا كعربون مسبق "لتحجز" حقك في شراء المعدات. وبالتالي يستطيع المحتالون تجميع مبلغًا ضخمًا ثم يختفون ولا تستطيع التواصل معهم بعد ذلك.
- إرسال الدفعة المسبقة إلى البطاقة
- لا تقم بالدفع المسبق بدون مستندات ورقية تؤكد عملية تحويل الأمول إذا ساورك أي شك في البائع خلال التواصل.
- إرسال إلى حساب "الوصي" “Trustee”
- هذا الطلب ينبغي أن يكون بمثابه إنذار فأنت على الأرجح تتواصل مع شخص محتال.
- إرسال إلى حساب الشركة باسم مشابه
- توخّ الحذر، فقد يختفي المحتالون أنفسهم أيضًا خلف شركات معلومة أو يدخلون تغييرات طفيفة على الاسم. لا تحول الأموال إذا ساورك شك في اسم الشركة.
- استبدال البيانات الخاصة في فاتورة شركة حقيقية
- قبل التحويل، تأكد أن البيانات المحددة صحيحة وأنها ترتبط أو لا ترتبط بالشركة المحددة.
معلومات الاتصال بالبائع














Designed for various types of autumn-spring field work:
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
Advantages and design features of the Green Wave vertical tillage turbo cultivator with a working width of 10.4 m:
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
Basic equipment:
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
Additional equipment:
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Specifications:
Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 10.4
Working length, m ... 8.9
Length during transportation, m ... 8.9
Height during transportation, m ... 4.5
Width during transportation, m ... 5.5
Total weight, t ... 11.2
Number of spring blocks, pcs … 32
Number of turbo disks, pcs ... 64
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 450
When deep processing is recommended, hp ... 500
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).